top of page
Search


Shaft Torsion Tester
A customer needed a gage machine programmed using Siemens as requested by their customer. They had brought me in for the controls...
David Pionk
Aug 5, 20211 min read
31 views
0 comments


Flywheel Bearing Press
Flywheel Bearing Press. A customer needed a machine's controls designed and installed for a press for installing a bearing into flywheel....
David Pionk
Aug 5, 20211 min read
26 views
0 comments


Thread roller loader
This is a loader for a hydraulic tread roller. Directional Regulated Systems, Inc. in Canton, MI did the mechanical build of the loader...
David Pionk
Dec 14, 20201 min read
34 views
0 comments


Upgrade to tube chamfer end finisher
A customer of mine had purchased an end finisher from a machine tool builder. They ran it for months and wanted to be able to integrate...
David Pionk
Dec 9, 20201 min read
33 views
0 comments


Williams White SH1500-144-108 Hydraulic Press
A new customer that was referred to me. They had asked if I could come take a look at a press that the control was not working and if I...
David Pionk
Nov 13, 20201 min read
55 views
0 comments
bottom of page